Chemcalc 12 - DOS Application
Engineers who need to design safe and economical flare network systems can model complex networks easily with CHEMCALC 12. This program calculates pressure drop, velocity and diameter for each pipe in the network, optimum pipe sizes, and pressure and velocity profiles.
|
Chemcalc 15 - DOS Application
Design and rate centrifugal compressors with this easy-to-use program. It also includes a database of 30 component gases to which the user can add or delete gases. Based on the theories of Elliott and Ingersoll-Rand, the program will design a compressor and analyze a multi-stage compressor with up to four stages of compression. It can determine a proper number of stages for a desired service based on a maximum gas temperature.
|
Chemcalc 4 (Version 2.0) - DOS Application
This four-part program will calculate multiphase flow using the Redlich-Kwong equation of state and NGPA K-values for calculating thermodynamic and physical properties and flashing along the pipe, calculate optimum pipe sizes, predict pipe diameter, flow rate, and pressure drop for single-phase flow, calculate pressure drop for pressure relief systems and compressible flow.
|
Composite Catalog of Drilling & Completions 2004, CD-ROM
- 
|
Composite Catalog of Oilfield Equipment & Services, 2002/2003 CD ROM
Composite Catalog
|
Composite Catalog of Oilfield Equipment and Services – 1986
|
CPPAC
Pump curves are wonderful, simple models to show how the equipment will perform under various conditions. You probably have a pump curve already. CPPAC lets you take existing conditions and build a new curve — one that accurately reflects what your pump is doing under your service conditions. You can save your input and calculation results to a file to use and modify later. You can have a different file for each pump you operate.
|
Energy Conversion 1.1 - Version A
- 
Energy Conversion is a new Windows based software package that quickly, easily and reliably calculates thermodynamic and transport properties of gaseous, liquid and solid species, contains coefficients for the calculation of physical properties.
|
Est$Pro
In most oil and gas companies, including both engineering firms and operating companies, there is a strong, regular need to produce quick, accurate cost estimates for new plants, major equipment acquisitions or upgrades, large maintenance projects, new buildings, etc. Long before we take the time and energy to count flanges and accurately specify control systems, we need to know if the darn thing will cost $10,000, $15,000, or $100,000! Here is the tool!
|
Flexcurv 2.0 For Windows
This handy numerical-analysis utility program generates coefficients and goodness-of-fit factors, tabulates correlations, and plots results graphically. Access features through a scroll-bar menu and edit the data using the full-featured, integrated data editor. Use a zoom feature on the graphs and enter free form equations into the plotter program. This program provides advanced variable x power functions highly suitable for difficult curves usually presented on multiple log cycle paper.
|
FNESS Version 4.5 for Windows ™
Desktop application for head loss calculating in complex distribution networks. For chemical, mechanical and civil engineers, FNESS support fluid flow calculations in a pipe network for the stead state situation based on Finite Element Methods. Powerful graphic interface speeds pipe network calculations. Results are shown in diagram form, indicating pressures and temperatures of the nodes, the outflows in the interconnection elements and the orientation of the flow. Software has robust report function.
|
Gas Dynamics 1.1
-
A new Windows based software package that quickly, easily and reliably calculates thermodynamic and transport properties of gaseous, liquid and solid species, analyzes power cycles, power cycle components/ processes and compressible flow.
|
GENNET – M
The name GENNET is an acronym for GENeral pipeline NETwork program. Thus, GENNET models systems comprised of pipes and Pressure/Temperature-changing equipment (pumps, compressors, heaters, valves, coolers, fittings, etc.) connected together in any configuration. GENNET-M is a Windows program that calculates flow rates, pressures, temperatures, velocity and other related variables in a pipeline network system carrying petroleum gases, liquids, water and multiphase mixtures under
|
GOWProp v6.0
Calculated PVT properties of gas, oil, and water — with your choice of calculation methods. Pick from a selection of standard equations for calculating certain properties. More than 12 properties are calculated and the results include a pressure depletion table of the various properties and will plot the output on screen. U.S. and SI Units.
|
HYDPRO
-
Drilling Hydraulics
|
InstruCalc 7.0
Size more than 50 different instruments with this easy-to-use and accurate sizing program.
|
InstruCalc Version 6.2
Old version now replaced by version 7.0
|
IVA - Industrial Vulnerability Assessment
-
This software product is designed to assist industrial facilities such as chemical plants and oil refineries to develop plans for preventing or mitigating terrorist or criminal actions that could have significant impacts.
|
NATASHA
Perform transient and steady-state analyses (surge analysis, waterhammer analysis) on pipelines and network models (1or more sources, 1 or more sinks, 0 or more loops) of up to 40 pipes. Model gathering systems, fire loops, and distribution systems with grid loops, multiple sources, and/or multiple sinks consisting of pipes of different sizes, pumps, valves, surge tanks, PRVs, fittings, and leaks. Will graphically plot node pressures and flows over time.
|
NATASHA Plus
NATASHA Plus does everything Natasha does for networks, plus handle different liquid properties (e.g. batching) and model larger systems (250 pipes). This program also has a drag reduction factor curve input option, line sizing and pressure calibration via viscosity or roughness.
|
PathView
-
3D Well Path Visualization Tool
|
PEPAC
Reservoir engineering programs and economic evaluation spreadsheets
|
PEPAC2
Drilling and production engineering
|
PEPAC3
Comprehensive log analysis package
|
Petrocalc 13 - DOS Application
Calculate gas volume and flow for standard orifice meters to full AGA-3 precision. The program calculates daily, weekly, or monthly statements; audit pipeline charts for correct volume and payment; monitor gas lift systems daily; and balance gas plant or field systems. It eliminates the need for field estimates or time-consuming hand calculations, and helps avoid lost production while speeding up correct volume reports.
|
Petrocalc 14 - DOS Application
Solve real world hole cleaning, stuck pipe, coiled tubing, and cementing problems with this annular flow simulation program. It uses state-of-the-art modeling techniques including boundary conforming grids and relaxation methods to produce an accurate model of the annular flow. Includes copy of Borehole Flow Modeling in Horizontal, Deviated, and Vertical Wells.
|
Petrocalc 3 - DOS Application
Generate oil and gas-related economic forecasts for up to 20 years. The program includes present-value profile, internal rate of return, profits/investment ratio, and other economic yardsticks. Also generate composite files from up to 20 results files. The program predicts single-well deliverability, generates API recovery factors, generates a schedule for oil or gas wells, makes volumetric computations, calculates reservoir volume from isopach planimeter data, figures undiscounted, risk-adjusted ROI ratio for a single or multi-well prospect, etc.
|
Petrocalc 6.1 for WindowsTM
Upgraded WindowsTM version of popular DOS program. Solve fracturing and acidizing design problems. Use these programs to evaluate the effectiveness and size of the treatment as well as the choice of different fluids and proppants. Calculate the effects of damage, flowback, proppant concentration and scheduling, and stimulation project economics.
|
Petrocalc 7 - DOS Application
Rapidly assess the effects of various Rw, cutoffs, and other parameters when analyzing wireline well log data (open-hole, although several of the programs can be used with cased-holes). In addition, there are 10 support programs that calculate correct Rt from dual induction/laterolog 8 device, Rw computed from Rwa or SP, shale volume from SP or gamma ray, and more.
|
Petrocalc 8 - DOS Application
This is a collection of 14 programs for all aspects of production engineering including, gas lift system analysis, beam pumping analysis, separator sizing, compressor design, flash vaporization, flowing and static bottom-hole pressures in gas wells, IPR analysis, and more.
|
Petrocalc 9 - DOS Application
Perform a waterflood feasibility study for a petroleum reservoir using actual or empirical data. Standard methods such as Stiles, Dykstra-Parsons, and Craig are included in the programs. The programs fall into five categories: reservoir engineering, PVT analysis, waterflood data entry, utility equations, waterflood models.
|
Petrochem Toolkit Ver. 1.5
Introducing an invaluable tool for refining and petrochemical engineers – Petrochem Toolkit Version 1.5 – for Windows. An easy to use Windows based software package designed to estimate important properties of liquid petroleum fractions, blend liquid petroleum streams, convert between a broad array of units, and quickly access essential properties of steam, pipe sizes and other useful data such as gas constants and more. A built in calculator and handy notepad are also included.
|
PetroPAC 1.0 for Windows™
Applied Drilling Engineering software, PetroPAC consists of 57 typical drilling programs divided into 5 categories: Cementing, Drilling Fluids, Drilling Hydraulics, Rotary Bits and Well Control. Each drilling programs comes complete with example applications in a Visual Basic environment. Each example provides a typical problem application for the program complete with step-by-step calculations and a reference for obtaining information on equation derivation and assumptions made.
|
Physical Properties 1.1
-
A new Windows based software package that quickly, easily and reliably calculates thermodynamic and transport properties of gaseous, liquid and solid species.
|
Physical Properties and Steam Approximations 1.1
-
A new Windows based software package that quickly, easily and reliably calculates thermodynamic and transport properties of gaseous, liquid and solid species and steam approximations for both saturated and superheated areas.
|
PipeCalc 1, Version 4.02
The workhorse software of pipeline calculations, this set of 16 routines builds upon a time-tested, proven program which originally appeared in 1983. Version 4.02 offers features which reflect the capabilities of today's computers and operating environments. Read on for details.
|
Pipeline Risk Controller Verson 2.0 for Windows
Here is a program that might change how you operate or design your pipeline systems! Using risk management concepts, PRC allows you to divide your pipeline system(s) into sections, gather meaningful data on each section, and assess the risks of each section. A host of analytical routines then allows you to slice and dice the data to get information out of the numbers.
|
Power and Propulsion Systems Analysis 1.1 - Version A
-
A new Windows based software package that quickly, easily and reliably calculates thermodynamic and transport properties of gaseous, liquid and solid species, analyzes power cycles, power cycle components/processes and compressible flow.
|
Power Systems Analysis 1.1
-
A new Windows based software package that quickly, easily and reliably calculates thermodynamic and transport properties of gaseous, liquid and solid species, analyzes power cycles and power cycle components/processes.
|
Process Tools Version 1.8 for Windows™
New Version! Now includes Plate Fin Exchangers. For the designer or operator in the petroleum and chemical industry. Using over 40 years of design and operating experience by the author, the program calculates units that enable the inexperienced technical user to determine accurate design or evaluate operations. This time saving, user friendly program is to complement simulation programs for detail design of process equipment. With simulation of the process and the Process Tools, you can design new facilities and/or evaluate existing operations.
|
S H E Auditor
-
A multi-task software tool designed to assist EH&S (Environmental, Health and Safety) personnel to both better manage their facility operations and to track their performance.
|
SIMPL2
SIMPL2 has the capabilities that SIMPL has, but additionally allows you to find the maximum flow capacity (deliverability) of a pipeline or well. SIMPL2 has an option to use the internally-generated oil viscosities or to input liquid viscosity versus temperature curves. You can model any Newtonian liquid (e.g., heavy unrefined crude oil, ethylene glycol, etc.). Further, SIMPL2 has a DPDT device that allows you to model pumps, compressors, heaters, coolers, minor losses across fittings, etc.
|
Steam Approximations 1.1
-
A new Windows based software package that quickly, easily and reliably calculates thermodynamic and transport properties of steam for saturated and superheated areas.
|
SuperSMITH™
SuperSMITH for Windows is a complete self-study package for reliability and variability solutions on a PC at a discounted price and includes WinSMITH Weibull and WinSMITH Visual from Fulton Findings, the PlayTIME With SuperSMITH tutorial and The New Weibull Handbook 4th Ed. copyrighted 1997 by Dr. Bob Abernathy. SuperSMITH performs all of the techniques covered in The New Weibull Handbook 4th Ed..
|
TADPRO
-
Torque and drag
|
WinHeat© – Fired Heater Thermal Rating & Design Software For Windows
Direct fired process heaters ... the critical component of many petro-chemical processes. These components must be configured correctly to ensure efficiency and optimum plant performance. As it is difficult to pro-actively allocate engineering resources to such equipment, many owners and designers rely solely upon manufacturers' design and analysis suggestions. WinHeat© and its "suite" of routines puts the control back into the hands of the process engineer or designer.
|
WinSMITH™ Visual for Windows®
WinSMITH™ Visual version 4.0 (WSV) is a Windows based scientific plotting software which acts as a plotting engine for other Fulton Findings software. WinSMITH™ Visual assists in analyzing data used for making reliability improvements and replaces the older VisualSMITH™ DOS program. WinSMITH™ Visual also makes Crow/AMSAA (formerly called Duane/AMSAA) reliability growth curves and with one click of an icon transforms the cumulative failure data into cumulative MTBF.
|
WinSMITH™ Weibull for Windows®
WinSMITH™ Weibull version 4.0 is the only software that implements all the Weibull Analysis techniques in The New Weibull Handbook 4th Ed. by Dr. Robert Abernethy, the standard source on Weibull analysis. Many of the techniques included are not available elsewhere, such as likelihood ratio confidence, simplified design (set) comparison, Kaplan-Meier simulation and solution, critical correlation coefficient, sudden-death WeiBayes, parameter as a function of engineering variable, etc. WinSMITH Weibull uses Weibull, Normal or LogNormal equations.
|
XPSIM
- 
eXtended Process SIMulation is a simple and complete industry simulator for modeling and optimization of plants in the petroleum, oil and gas, and chemical industries.
|
